Group Notes
Group notes are used when a practitioner sees several patients at one time and then needs to write a note for each individual who attended the group session.
Configuring Group Notes
Before you can start a group note, each Group must have a note type associated with each status for the group. Without this crucial piece of configuration (performed by your administrator), the application will not let you start notes for the Group.
This configuration is done under the Organization Settings that can only be accessed by Bells Administrators. For more details on configuring Group Notes, refer to Configuring Note Types.
Writing Group Notes
Group Notes can be started from a group appointment in the agenda section, or from the Groups tab of the patients section.
To start a Group Note from an Agenda appointment,
- Click Agenda in the left navigation bar.
- Click on an appointment.
- The appointment detail panel appears on the right.
- Click on Start Note at the bottom of the Group Appointment detail.
To start a Group Note from the Patient,
- Click Patients in the left navigation bar.
- Click on the Groups tab.
- Point to a group to see the Start Note button on the far right.
- Click Start Note.
Groups list on the Groups tab of the Patient section:
This display can be filtered via the toggle in the top right to show only the configured groups or all groups. Notes may only be written for configured groups. Additionally, the groups can be filtered by Patients or Staff via the columns in the display.
myAvatar users: The Staff column of this display will not show since Staff are not associated to groups for myAvatar.
Setting up the Group Note
When you click start note, the Group Session display for the group opens. All details that can be defaulted from either the appointment or the group configuration will auto-populate.
The Group name will default for the group from the appointment or the group selected on the patient section when the start note button is selected. This field is not editable.
Session Date/Time will default to either
- the date/time of the appointment when the group note is started from the agenda
- the current date/time when the group note is started from the Groups tab
Session date/time is required to start the group note.
Location may or may not default, depending on appointment and settings within Bells.
For CT|One users, your Bells administrators can set a default Place of Service when the Location is selected. This configuration is done via the Location display.
Details from appointments (where applicable) will also default.
Location and Place of Service (where applicable) are required to start the group note.
If the group note is started from an appointment, the Location will be filtered to only show the Location Roles based on the appointment Location and Service Type.
Service Type will default based on the selected appointment or default for the group.
Note: When the Location is selected from the list on the Group Session and the selected Service Type is not configured for that Location, the Service Type will clear out. An alert to the user will display "The location selected is not configured for the original service type for the group. Please select a new Service Type."
Service Type is required to start the group note. For myAvatar and CT|One users, the services available to select for the group note may be filtered to only the services available for the group note's note type(s). This is based on configuration on the group note type.
Group Administrators
A practitioner or a non-practitioner can administer a Bells Group Note.
To set the Group Administrator, simply
- Start a group note.
- Type to search the name of the staff that will administer the group
Group Administrators can
- Start a group note
- Set the date, time, location and service type for a group
- Modify the group summary
- Assign practitioners to the group
- Remove practitioners from the group
- Assign patients to the group
- Remove patients from the group
- Reassign the practitioner assigned to a patient in the group
- Change patient show status
- Delete incomplete notes in the group via the Unsigned Notes Report
- Delete an entire group note if none of the notes in the group have been signed
Bells Administrators have the same permissions as the Group Administrator.
Practitioners
The Primary Practitioner will default to the user who started the note.
If the group has staff assigned to it in CT|One, the staff for the group will show for selection in the drop-downs for the practitioners. If the group does not have staff assigned to it in CT|One, the practitioners drop-downs will show all staff for the organization.
At a minimum, a primary practitioner is required to start the group note. The primary practitioner is indicated by the blue (P) next to the first position practitioner in the display. The primary can be set to any practitioner for the group by clicking on the non-primary practitioner and setting it to Mark Primary.
Additional practitioners can be added to the group note via the + button to the right of the primary practitioner.
The blue number to the left of the practitioner name in the display indicates the number of patients for the group assigned to that practitioner.
Inactive users will not display for selection in the Practitioner drop-down.
Group notes can have up to eight (8) practitioners added.
Patients
In addition to the patients already assigned to the group, you can add additional patients to the group note. Simply enter text in the Patient field to start a patient search. Only patients with active enrollments that are not already a part of the group note can be added. As part of this search and other patient searches in Bells, you will see a pill-style toggle for Bells and your EHR. When toggled to Bells you'll search for patients in Bells. When toggled to your EHR you'll be searching for patients that haven't synced to Bells that are part of your EHR. Clicking the patient in your EHR side of the search will pull that patient and their data into Bells.
Patients are automatically added to the Show status.
myEvolv does not allow you to add additional patients to the group note. Groups and associated patients are configured in myEvolv. As a result, you will not see the patient search bar.
myAvatar users can only search by the last name due to the functionality available from myAvatar.
Note: Adding patients here ONLY adds them to this group note, it does not add the patient permanently to the group. All patients can be removed from the group note by hovering on the patient card once the patient is in the group and clicking on the X in the right corner.
The patient section shows the different show statuses that are available, and you can drag and drop patients between the show statuses based on the group attendance.
In the patient section, the patient card includes the initials of the assigned practitioner for that patient's group note in the bottom right corner. If the initials for the practitioner are blue, that indicates that is the primary practitioner. Non-primary practitioner initials are shown in gray.
To assign patients to a practitioner, you can drag and drop the patient onto the practitioner in the practitioner section or click the initials of the practitioner in the bottom right corner of the patient card.
Additionally, you can filter the patients by practitioner.
When the group note is started, the patient filter is set to All. All patients for the group display.
When a practitioner filter is applied, by clicking the number circle to the left of the practitioner's name, the display of patients will filter to just the patients assigned to that practitioner.
Starting the Group Note
Once all patients are assigned a practitioner and moved to a show status, you are ready to start the note.
Clicking the Start Note button creates notes for all patients in the group note.
Note: If patients are assigned to a secondary practitioner and one is not selected for the group note, a popup will occur to alert you.
Clicking Cancel will bring you back to the previous screen where you selected to start the group note, either the agenda or the group tab of the patient section.
If your Bells Administrator has configured your group with more than one Group Note Type set you will see a pop up when you start the group note.
The Note Type Assignment pop-up allows the user who is starting the group note to change what Note Type set and Service is used for the group per practitioner in the group.
Bells' group note editor is very similar to the standard progress note editor.
The display is split into three sections.
The left pane shows the patients in the Show status for the group note. You can select the No Show and Cancelled tabs as well to view and write the group notes for patients set to those statuses. This pane is further broken down to display notes for each show status that are signed and unsigned, each category will show a counter for the number of notes that are signed relative to the total number of notes for the status and all the notes that are unsigned relative to the total number of notes for the status.
In the top right corner of the left pane, there is a + icon to add additional patients or practitioners to the group on the fly. The practitioner who adds these patients is the assigned practitioner for the newly added patient in the group note, but this can be adjusted in the display or via the initials in the patient's card in the left pane. The display is separated into two tabs, one to add patients and one to add practitioners.
myEvolv does not allow you to add additional patients to the group note. Groups and associated patients are configured in myEvolv. As a result, you will not see the Practitioner tab in this display.
By default, the group summary for the show status will be selected and highlighted in green. Changing the tabs will take you to the different show statuses to write the notes for the patients in the No Show or Cancelled statuses.
Additionally, patients can be moved to different statuses via the status dropdown next to the Group Session Information label in the header of the middle pane of the note.
The middle pane shows the group summary and the note editor for the patient note.
The right pane shows the standard Bells pane including the session to sign display and the correctness and grammar suggestions.
Group Session Information
The Group Session Information will be included in every patient's group progress note. It includes the Group Session Date/Time, Group Summary, and Group Topics. The group session date/time and group summary are required for signing the notes. This header will be pinned to the top of the group progress note editor, so as you scroll through the note those important details will always be available. This header can be collapsed or expanded.
The Group Topics drop-down lists the session topics from CT|One group maintenance. This is a multi-select drop-down so you can select one or more session topics for the group.
myAvatar and myEvolv session topics are configured by the Bells administrator.
Session date/time and session topics can be overridden at the individual note level.
When you are writing the note for an individual patient you can click the >> icon next to the selected patient's avatar in the top left corner to access their patient details sidebar as well as the patient's scribbles.
The Group Summary can be different for each Show Status.
Note: Once any of the notes for the show status are signed, the Group Summary for that show status is locked down and cannot be edited.
Service Type Override
The No Show and Cancelled show status group notes can have their Service Type overridden. This means the service type on the show note doesn't have to be the service type for the no show or cancelled notes in the group.
Toggling the Override Service Type toggle 
on the Group Summary display for No Show or Cancelled notes will display an additional drop-down to select a different service type from the one selected when the group session was started. This overridden service type will apply to each patient note for the status.
Filling out the Patient Note
The note pane in the middle displays the group summary when the group summary is selected in the left pane. When an individual patient is selected in the left pane, the note for that patient will show in the note pane.
The patient note includes the Group Session Information at the top. The Group Session Information is not editable in the patient note. The Primary practitioner can edit the Group Session information by either clicking the pencil icon in the Group Session Information section of the patient note or by clicking on the Group Summary section of the left pane. The Group Session Information for the show status remains editable until the first patient note for the show status in the group is signed. After that point, the Group Session Information for the show status cannot be edited, even by the primary practitioner.
The Group Session Information is followed by a check box to "Override group session information." 
This check box allows you to override the group session information for the individual patient. You can override the Session date/time, Service Type, Location, and session topics. This can be done for any of the statuses - show, no show or cancelled. The Session Time will not be available to override for the no-show or cancelled status since it is not available in those statuses.
myAvatar users will see an additional field for myAvatar Note Type and Program. These selections are much like the myAvatar Note Type and Program selection for individual patient notes. This is a required selection per individual patient note for the group.
Finally, the Note Type configured for the group is shown, determined by the Show Status.
The same field requirements and behavior that are used for standard progress notes will be respected in the group note.
Just like in the standard progress note, the Bells pane will display on the right side. The Bells pane displays your session to sign metric and any corrections and grammar suggestions as well as Clinical Recommendations and validations (if configured for your organization).
If the patient has more than 1 program in their enrollment, the user will see a program selection field in the note.
Signing Group Notes
Once the note is complete and all required fields are supplied, you can mark the note as reviewed. This functionality mimics the behavior of Bulk Sign.
If there are missing required patient/guardian/additional signatures, the note is considered incomplete and cannot be marked as reviewed. These signatures must be included prior to the author signature.
You can sign group notes for one patient at a time or you can sign several patients in the group at once.
There are two ways to mark a note as reviewed
- Hover over the patient card in the left pane and click the checkmark in the upper right side of the patient card
- Click Mark All Reviewed at the top of the left pane
When one or more notes are Marked as reviewed, you can click the Sign reviewed notes button.
When one of the group notes for a show status is signed, the group summary for that show status is locked down. Example: If a note in No Show is signed, the No Show group summary can not be edited beyond that point. However, the user can continue to make edits to the group summaries for the Show and Cancelled statuses.
Group Notes can also be saved and finished later by clicking the button "Save and finish later".
Note - Group Notes do not show in Bulk Sign. They must be signed from within the Group Note editor.
Group Notes can be unsigned just like a regular progress note. When you unsign an individual patient note from a group session after all the notes are signed in that group note, Bells will reopen the group session in the open sessions tab to display until all notes in the group are signed again. (Note - only the unsigned note would need to be re-signed.)
myEvolv Group Notes will sync into myEvolv once all notes for the group are signed.
Deleting a Group Note
Users can delete individual patient notes as part of a group note. This can be useful when a patient's note is accidentally created, or the patient doesn't have criteria that meet the group note requirements such as goals/objectives or diagnosis. This allows the user a workaround to correct the note.
Within the group note editor, there is a delete icon in the top header that follows the same note delete functionality as a standard progress note.
You may delete any of the group notes where you are the author and that are in Draft status. Deleting a draft removes it completely from the group and the system; the draft record will no longer be present in the chart or any of the other draft locations such as the Chart section or the Dashboard.
When you click to delete the progress note, you will be prompted to make sure you want to delete the session.
Click Yes to permanently delete the note.
Click No will keep the progress note, canceling the delete.